How to remote start Chevy Colorado with key fob or mobile device

[eac_elementor_tmpl id="5436"]

The Chevy Colorado offers a convenient remote start feature that enables you to start your vehicle’s engine from a distance. This feature allows you to cool down or preheat the interior before entering the vehicle. There are several benefits to using the remote start feature on the Chevy Colorado, particularly in extreme weather conditions.

By starting your vehicle remotely, you can ensure a comfortable temperature inside the cabin, whether it’s too hot or cold outside. The system activates the air conditioning or heating system, making the interior more tolerable by the time you reach your vehicle.

Table of Contents

Remote start procedure for Colorado

To use the remote start feature on your Chevy Colorado, follow these simple steps:

Press the LOCK button on your Colorado’s key fob.
Hold down the REMOTE START button on the key fob for at least four seconds. This action triggers the engine to start, and the turn signal lights flash to indicate the process.
After the engine starts remotely, it will run for 15 minutes before automatically shutting down.
It’s important to note that the vehicle remains secured during remote start. To switch on the ignition and drive the vehicle, a valid key must be inside. The parking lamps will remain on as long as the engine is running.

If you wish to stop the engine remotely, press and hold the REMOTE START button on the key fob for three seconds. This action will halt the engine, turn off the parking lights, and keep the doors locked.

The Chevy Colorado’s remote start feature allows for a 15-minute runtime initially. However, if you need more time, you can perform another remote start procedure by pressing the LOCK button and then holding the REMOTE START button for four seconds. This will extend the engine’s runtime for another 15 minutes, providing a total of 30 minutes of continuous operation.

Please note that you can only extend the remote start once. The second 15-minute period is added to the initial 15 minutes, and a maximum of two remote starts or one start with an extension is allowed between ignition cycles. After using the remote start feature, the vehicle must be started normally before you can utilize remote start again.

During a remote start, the climate control system on the Chevy Colorado will maintain the previous settings. Additionally, the rear defogger may activate based on cold ambient conditions. If your vehicle has auto heated or ventilated seats, they may also turn on during a remote start.

For instance, during a remote start on cold days, the heated seats will activate automatically, while on warm days, the ventilated seats will turn on. However, if the auto heated or ventilated seats feature is not enabled, the heated or ventilated seats may cancel when the ignition is turned on. In such cases, you can manually activate the heated or ventilated seats by pressing the respective buttons after starting the vehicle.

Enable or disable heated seats

To enable or disable the heated seats feature during remote start, follow these steps:

Press the Settings icon on the Home Page of the infotainment display.
Select Vehicle to access the available options.
Choose Remote Lock, Unlock, and Start.
Locate the Remote Start Auto Heat Seats option and turn it On or Off.

Similarly, if your Colorado is equipped with a heated steering wheel, it may turn on during a remote start when the “Remote Start Auto Heat Seats” option is enabled in the vehicle settings.

Enable or disable ventilated seats

To enable or disable the ventilated seats feature during remote start, follow these steps:

Press the Settings icon on the Home Page of the infotainment display.
Select Vehicle to access the available options.
Choose Remote Lock, Unlock, and Start.
Find the Remote Start Auto Cool Seats option and turn it On or Off.

During a remote start, it’s normal for the steering column in the Chevy Colorado to be locked. However, the column should unlock once you press the brake pedal and start the vehicle.

To ensure safety and security, the remote engine start system on the Chevy Colorado will prevent starting or stop the engine if certain conditions are met. These conditions include exceeding a total run-time of 30 minutes, the coolant temperature reaching a high level, low oil pressure, or triggering the security alarm. Additionally, the engine may power down if the vehicle’s engine management system detects a safety risk due to a vehicle-related problem.

Remote start system not working on Chevy Colorado

If the remote start system fails to work on your Chevy Colorado, there are several potential reasons to consider:

Ensure that the hood is fully closed.
Verify that all vehicle doors are securely closed.
Check that the transmission is in park mode (P).
Ensure that the 12v battery voltage is not too low.
If the service engine light is on in the instrument cluster, it may affect the remote start functionality.
Make sure that the remote key is not inside the vehicle.
Check for an emission control system malfunction, indicated by the malfunction indicator lamp being on.
If the hazard flashers are activated, it can prevent remote start.
Note that a maximum of two remote vehicle starts or one start with an extension is allowed between ignition cycles.
If none of the above issues apply, there may be a malfunction with the remote start system. In such cases, it is recommended to have your Chevy Colorado inspected by an authorized dealer to determine if the vehicle is equipped with a remote start system and to address any malfunctions.

In summary, the Chevy Colorado’s remote start feature provides convenience and comfort by allowing you to control the vehicle’s engine remotely. Whether you want to cool down or warm up the interior, this feature proves useful in extreme weather conditions. By following the proper steps and considering the necessary precautions, you can make the most of the remote start feature on your Chevy Colorado.

Remote start Chevy Colorado with a mobile device

To initiate remote start for your Chevy Colorado using a mobile device, you’ll need to subscribe to GM’s OnStar Remote Access Plan, which typically costs around $15 per month. Here’s a step-by-step guide on how to remotely start and stop your Colorado’s engine using the myChevrolet app on an Apple or Android mobile device:

Download the “myChevrolet” app from the App Store or Google Play onto your mobile device.
Locate and tap the myChevrolet app icon on your device to launch the app.
Select your region and country from the available options and tap “Continue.”
Sign in to your Chevrolet Owner Center account. If you don’t have an account, you can create a new one.
Accept the User Terms and Privacy Statement prompts presented to you.
Add your Chevy Colorado to the myChevrolet app by entering your vehicle’s VIN number.
On the home screen of the app, press and hold the POWER button.
The turn signal lights will flash, and the engine will start running.
The engine will automatically run for 15 minutes before shutting down. The app will display a countdown timer on the power button.

To remotely stop the engine of your Chevy Colorado using the mobile app, follow these steps:

Open the myChevrolet app.
Locate the power button on the app’s screen that is displaying the engine shutdown countdown.
Touch the power button again.
A prompt will appear asking if you want to turn off the vehicle. Touch “Turn Vehicle Off” to stop the engine.

By following these instructions, you can conveniently start and stop your Chevy Colorado’s engine remotely using your mobile device and the myChevrolet app.